Lyndahl HDMI SL-P Connector for Self-Assembly

Name: Lyndahl HDMI SL-P connector for self-assembly, unit price
Brand: Lyndahl
SKU: LKSLCON1
Price: 8.95 EUR
Availability: InStock

Lyndahl HDMI SL-P field-assembly connector

Lyndahl HDMI SL-P connector for self-assembly, unit price

€8,95

1/2

Lyndahl HDMI SL-P connector for self-assembly, unit price

Item no.: LKSLCON1

€8,95

incl. VAT. Shipping (delivery time 1-3 days) calculated at checkout

3102 in stock

Shipping today if you order within .

Product description

Making professional HDMI connections yourself is no longer a problem with our SL-P technology! The patented Lyndahl SL-P connector can be easily and securely connected to the raw cable using the special pliers. Self-produced HDMI cables do not differ from very high-quality HDMI cables of the SL-P series! The connector can be used for the Lyndahl SL-P HDMI cable 24AWG and is supplied complete with two insulation displacement connectors.

- 19-pin connector with gold contacts

- complete with insulation displacement guides, full metal housing, strain relief and mounting screws.

- Compatible with HDMI 1.3 - 1.4a - 2.0 with Ethernet

- universally usable for LYNDAHL SL-P HDMI cables AWG 24 and AWG26

- Assembly with special pliers (not included), no soldering required!

The SL-P HDMI connectors are designed exclusively for solderless assembly with the SL-P assembly pliers and the Lyndahl SL-P HDMI cable!

Lyndahl SL-P HDMI technology for self-assembly:

The SL-P cable technology for self-assembly. This is particularly suitable if you have a narrow cable duct through which you can only get a loose HDMI cable.

Frequently asked questions about this product

What is the maximum length of an HDMI cable?

There is no fixed limit — resolution, frame rate and the signal quality of the source decide. Rule of thumb from our support work: Full HD runs reliably up to about 10 m, 4K at 30 Hz has been tested with our SL-P cable up to 15 m, 4K at 60 Hz becomes critical beyond a few metres. For long runs we recommend cables with a built-in amplifier (CE-A series).

Can I extend an HDMI cable?

Ready-made extensions usually stop at 5 m. A single continuous cable is always better. Where that is impossible, a coupler with two sockets (e.g. LKHA004) works — but every plug connection costs signal reserve, so test before plastering anything in.

Assembling HDMI cables yourself — how does the SL-P system work?

The SL-P system consists of HDMI bulk cable (AWG 24 or AWG 26) and connectors fitted without soldering using insulation-displacement technology. The advantage: the cable is pulled through the conduit first, the connector goes on afterwards. AWG 24 offers more reserve on long runs, AWG 26 is thinner and more flexible.

Does a pre-assembled HDMI cable fit through a conduit?

The finished plug with its strain relief is usually too thick for common conduits. Two proven approaches: pull in bulk cable and fit the SL-P connector after pulling — or install a wall box with a rear-side connection.

Are HDMI versions compatible with each other?

Yes. The plug has stayed the same since the first HDMI versions, so devices and cables of different versions can be combined. However, the weakest link applies: the usable features are determined by the lowest version involved.

Which cable fits the SL-P connector — AWG 24 or AWG 26?

Both: the insulation-displacement contacts of the SL-P connector are matched to our halogen-free HDMI cable by the metre in AWG 24 and AWG 26, available loose or on a 100 m reel. With third-party cable the conductor diameter decides — if it is too small the contacts do not bite reliably, and the fault shows up later as dropouts rather than straight away. Use the assembly guide and the IDC guide when making up a cable; the crimping tool is also available as a 7-day rental if you only need to pull a single cable through a conduit.