Lyndahl LKPA070 High-end speaker terminal, with anti-twist protection

black

€3,86

1/2

Lyndahl LKPA070 High-end speaker terminal, with anti-twist protection

Name: Lyndahl LKPA070 High-end speaker terminal, with anti-twist protection
Brand: Lyndahl
SKU: LKPA070SW
Price: 3.86 EUR
Availability: InStock

Item no.: LKPA070SW

€3,86

incl. VAT. Shipping (delivery time 1-3 days) calculated at checkout

747 in stock

Shipping today if you order within .

Downloads & Documentation

Document	Download
Data sheet	PDF

Product description

Lyndahl LKPA070 high-quality built-in terminal for speakers

The speaker terminal has a high-end pole terminal made of solid brass and is hard gold-plated.

The insulation reliably protects your valuable components from short circuits. To differentiate the channel, the terminal is optionally provided with a black or red marking.

Special feature: To prevent the pole terminals from spinning, the terminal has an anti-twist protection.

The built-in terminal offers the following connection options:

Front connection option

- banana plug
- cable lugs
- ring lugs
- cable with wire end ferrules
- bare cable

Rear connection option:

- banana plug
- cable lugs
- ring lugs
- cable with wire end ferrules
- bare cable
- soldering

Frequently asked questions about this product

Which speaker cable should I use, and how do I connect it cleanly?

For new runs use 1 to 2.5 mm²; the amplifier-to-speaker run should not much exceed 10 m. Extending by twisting or with a terminal block is fine — just get the polarity right. Bare strands fray: ferrules for clamp terminals, banana plugs or spades for binding posts.

How do I split and strip speaker cable sold by the metre?

With twin cable the transparent jacket forms a web between the two conductors. Pull the two apart by hand at the end instead of cutting around the cable — the web tears cleanly and no strands are nicked. Then strip about 8 to 10 mm, twist the strands and lead them into the clamp or terminal. In spring clamps and screw terminals ferrules keep the strands together; we stock them to match the 1.5 mm² cable in packs of 10 and 100. Do not tin the ends: solder flows under pressure and the clamped joint works loose over time.

Can I connect several speakers or pairs to one amplifier?

In principle yes — impedance is the deciding factor. Both channels should carry the same load, and the total impedance must not fall below the amplifier minimum: with identical speakers, parallel wiring halves the value, series wiring doubles it. The AMP4X15BT is designed for four speakers out of the box.