Product description
Cobra ParkMaster Kit F294 consisting of the control unit and 4 mini ultrasonic sensors for the front
The Cobra ParkMaster system impresses not only with its accuracy but also with its ease of use.
Thanks to the clip mounting, the mini ultrasonic sensors are very easy to install and very precise. The small sensors have a diameter of only 22 mm and the retaining ring of the sensor is very small at 0.75 mm in height. If you paint the sensors in the vehicle colour, they integrate discreetly into the bumper.
4 mini ultrasonic sensors are included in the scope of delivery. The sensors thus secure an area of approx. 100 cm.
You do not need to specially teach in or set up the system. It calibrates itself automatically. However, you can of course also manually adjust things such as volume or sensitivity.
The ParkMaster activates itself automatically when reverse gear is engaged and signals readiness with a beep. When you take the vehicle out of reverse gear again, the system deactivates automatically. With the front variant in particular, additional activation via the supplied button is also possible. The ParkMaster also activates when the ignition is switched on. However, if it does not detect an obstacle within 10 seconds, it switches off again. If it has detected an obstacle, it remains active until it has not detected an obstacle for 10 seconds. With this system, you save time during installation and the costs for expensive retrofits.
Please note the sensor diameter of 22 mm. The use of adapter rings is not possible.
